Designs to Match Specifications
The roof configuration is an important part of specifying any oak-framed building. As well as having a significant impact on the finished appearance of the structure, the roof specified can influence its proportions, available space, and how comfortably the design sits alongside your client’s existing property.
For you, this means considering the roof form as part of the wider specification from an early stage. Your client may already have a particular look in mind, or they may need your guidance to understand how options such as gable ends, barn hips, full hips, and catslides could affect their finished building.
We manufacture bespoke oak frames to suit the individual requirements of each project. Understanding the different roof options available can therefore help you establish what your client needs before progressing with their frame.
Roof End Options for Oak-Framed Buildings
The roof end can dramatically change the profile of an oak-framed building, even where the footprint and wider design remain similar. Three of the main configurations to consider are gable ends, barn hips, and full hips.
Gable Ends
A gable end is the triangular section formed at the end of a pitched roof, extending upwards from eaves level towards the ridge. The term is also commonly used to refer to the triangular section of wall beneath the roof covering.
Gables create a distinctive and traditional roof profile, making them a natural option for many oak-framed structures. Because the pitched roof continues at its full height to the end of the building, a gable can also make the roof itself a particularly prominent architectural feature.
When discussing this option with your client, consider how the proportions of the gable will relate to the rest of the building and the surrounding property. The pitch, span, ridge height, and elevations should all be considered together so that the roof forms a coherent part of the overall specification.


Barn Hips or Half Hips
A barn hip can also be referred to as a half hip, clipped gable, or Dutch hip. Instead of the gable continuing all the way to the ridge, its upper portion is replaced by a small sloping section of roof. This creates a roof profile that combines characteristics of both gabled and hipped designs. The lower section retains the visual effect of a gable, while the clipped upper section creates a softer transition towards the ridge.
For clients considering a more rustic aesthetic option for their oak-framed building, a barn hip can provide an alternative to both a conventional gable and a completely hipped roof. When specifying one, the roof should again be considered alongside the dimensions and elevations of the complete structure.
Full Hips
A full hip differs from a gable because the end of the roof is also sloped. The roof rises from eaves level towards the ridge rather than finishing with a vertical triangular gable. This creates a noticeably different silhouette and means that the roof slopes form an important part of every elevation.
Whether this is the right approach for a project will depend on the overall design your client wants to achieve. Where the oak-framed structure is being positioned alongside an existing property or other buildings, it is also worth considering how the hipped profile will relate to the surrounding rooflines.


Catslide Roofs
A catslide roof is formed when one roof slope continues down below the principal eaves height. This creates an extended slope on one side of the building rather than having both sides terminate at the same eaves level. One of the important advantages of this configuration is the ability to create a greater depth of building without increasing the ridge height by the same amount.
This can make catslides particularly useful when working through the proportions of an oak-framed structure with your client. Rather than simply increasing the size of the entire roof to accommodate additional depth, a catslide creates an asymmetric profile and makes the extended roof slope an intentional part of the architecture.
The result can also give an oak-framed building a distinctive traditional character. As with any roof configuration, however, it should be considered in the context of the complete design rather than specified independently.
What Should You Consider When Choosing a Roof Option?
There isn’t necessarily one roof configuration that will be suitable for every oak-framed project. The right solution will depend on the building itself, the site, and what your client wants to achieve.
Working through some of the following considerations early can make it easier to narrow down the options.
What Does Your Client Want the Finished Building to Look Like?
Your client may know they want an oak-framed garage, garden room, or another structure without having considered how significantly its roof will affect the finished appearance. This is where discussing the different configurations can be valuable.
A conventional gable, clipped barn hip, and full hip can each give an otherwise similar building a noticeably different character. A catslide can alter the proportions further by creating a longer roof slope on one elevation.
Understanding your client’s aesthetic preferences at the beginning of the specification process can help ensure these decisions aren’t left until later.
What are the Building’s Dimensions?
The dimensions and proportions of the proposed structure should also inform the roof specification. Consider its width and depth alongside the proposed roof pitch, eaves, and ridge. Rather than thinking about the footprint and roof separately, viewing them as parts of the same design can help create more balanced proportions.
Catslides are particularly relevant here because extending one slope below the normal eaves level can provide additional building depth without requiring a corresponding increase to the ridge height.
How Will the Structure Relate to the Existing Property?
An oak-framed structure doesn’t necessarily have to reproduce the architecture of an existing property, but the relationship between the two is worth considering. Rooflines are particularly visible architectural features. The proportions, pitch, and overall profile of the proposed building can therefore influence how naturally it sits within the wider site.
For a detached garage or complex, this might mean considering how the new structure will appear alongside the main house. For an oak-framed garden room, extension, porch, or lean-to, the relationship becomes even more immediate because the new structure may connect directly to the property.
Helping your client consider the complete site rather than the oak frame in isolation can lead to a more cohesive finished result.
Are There Planning or Building Regulation Considerations?
Planning and Building Regulations should also be considered before the specification is finalised. Factors including the dimensions, height, position, and intended use of a building, can all affect the requirements that apply to a particular project. Permitted development rights may be available in some circumstances, while other projects may require planning permission.
New-build properties may also have different permitted development circumstances, so assumptions shouldnβt be made based on another project. Always check the requirements for the specific site with the relevant local authority where necessary.
Choosing the Roof Covering
Choosing the shape of the roof is only one part of specifying it. Once you’ve established whether the project will use gable ends, barn hips, full hips, a catslide, or a combination appropriate to the design, you and your client will also need to consider how the roof will be finished.
The roofing material can have a significant influence on the appearance of the completed structure and should therefore be considered alongside the oak frame, roof form, and surrounding property.
Visit our Roofing Material Options to explore the available choices and continue developing your client’s specification.
Specifying Oak Frames for Your Clients
Whether your client comes to you with a detailed idea of what they want or needs your help developing the specification, Oak Frames Direct can manufacture an oak frame around the projectβs requirements. Our frames combine traditional green oak construction principles with modern precision engineering. Each project is made to order, with designs developed to accommodate the natural characteristics and shrinkage of green oak.
Quality Assurance
Quality is equally important when you’re supplying and assembling a structure on behalf of somebody else. We manufacture to BM TRADA Q-Mark-equivalent quality standards, covering 22 separate industry standards within our manufacturing process. We also perform professional in-house timber grading and carefully manage all production processes.
Relevant structural considerations are incorporated into the design process, including Eurocode factors relating to the project’s location, elevation, orientation, and wind load. This allows these requirements to be considered as part of the specification and quotation rather than becoming an unexpected consideration further into the project.
Frames are precision-manufactured off-site and supplied as kits, with easy-to-follow assembly instructions to support efficient installation on site. The structural oak frame is also supplied with a 10-year guarantee, giving you another important point of reassurance to pass on to your client.
Configure Your Next Oak-Framed Project
A well-considered roof specification helps ensure the oak frame works for the building, the site, and, ultimately, your client’s requirements.
If you already know what your client needs, use our quick, clever, and completely free Online Builder to start configuring their oak-framed building and get a quote.
If you’re still working through roof options, dimensions, or other elements of the specification, get in touch to discuss the project with our team. We can help you establish the requirements before your frame progresses into manufacture.

